Statistical Optimization and Decolourization of Methyl Violet Using Peroxisdase from Radish
DOI:
https://doi.org/10.37591/jowppr.v1i1.530Keywords:
Methyl violet, raphanus sativus peroxidase, response surface methodology, box behnken designAbstract
Statistical optimization design based on Response surface methodology for the decolourization of methyl violet using peroxidase from radish (Raphanus sativus) was applied. Effect of four influencing parameters (pH, Temperature, Dye concentration, enzyme volume) on decolourization was studied using One Factor At a Time (OFAT) method. The factors were optimized using RSM based on Box- Behnken design and analyzed for its significance through Analysis of Variance. The optimized operating conditions for enzymatic degradation were found to be: Temperature 40°C; Dye concentration 100 mg/L; Incubation time 60 min; Enzyme volume 0.75 mL at pH 7, maximum decolourization efficiency of 72.46% was obtained at this optimized conditions. The predicted decolourization rate under the optimum conditions was 65.20%. Verification experiments carried out closely agreed with the predicted value. The determination coefficient of the model was R² 0.9310. The results signify that RSM based Box-Behnken design is a dependable method to optimize the operating conditions of methyl violet decolourization using radish peroxidase.
Downloads
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |