Bioremediation: Removal of Pb2+, Cr3+ and Cd2+ from Aqueous Solution using Immobilized Ficus sycomorus Leaves

Authors

  • Ayodele Akinterinwa Department of Chemistry, Modibbo Adama University of Technology, Yola. P.M.B 2076, Adamawa State, Nigeria
  • I. I. Nkafamiya Department of Chemistry, Modibbo Adama University of Technology, Yola. P.M.B 2076, Adamawa State, Nigeria
  • Peter Michael Dass Department of Chemistry, Modibbo Adama University of Technology, Yola. P.M.B 2076, Adamawa State, Nigeria
  • Mustapha Adamu Department of Chemistry, Modibbo Adama University of Technology, Yola. P.M.B 2076, Adamawa State, Nigeria

DOI:

https://doi.org/10.37591/jowppr.v2i3.515

Keywords:

Bioremediation, Ficus sycomorus, immobilization, sorption, heavy metals

Abstract

This study investigated the effectiveness of immobilized Ficus sycomorus leaves (IFSL) for the removal of Pb2+, Cr3+ and Cd2+ions from waste water. The immobilization of Ficus sycomorus leaves was achieved by entrapping it within a polymeric matrix of calcium alginate. Sorption capacity (in percentage) of IFSL was determined from the decrease in the concentration of aqueous solutions of Pb2+, Cr3+ and Cd2+ with reference to the final concentrations of the solutions obtained using atomic absorption spectrophotometer (AAS). IFSL exhibited the highest sorption capacity for Pb2+ (99.97±0.0011) followed by Cr3+ (93.76±0.0012) and the least for Cd2+ (87.72±0.0016). Experimental parameters that influence the sorption capacity of these heavy metal ions such as pH, contact time, ionic strength, and initial metal ion concentration were investigated. The result obtained shows that there was an increase in sorption capacity as the pH, contact time, and initial metal ion concentration increases, while there was a decrease in sorption capacity as ionic strength increases. These results show that IFSL can be an effective biosorbent for waste water treatment; hence, a cheap and cost saving technology for treatment of an aqueous solution.

 

Downloads

Published

2019-04-22

Issue

Vol. 2 No. 3 (2015)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.