Inverse Heat Transfer Analysis Applied to Heat Treatment Process

Authors

  • Harsh Dalal Student, Department of Mechanical Engineering, Sardar Vallabhbhai Patel Institute of Technology, Vasad, Gujarat,
  • Kaiwal Shah Student, Thermal Science and Engineering, Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal
  • Kevin Patel Student, Department of Mechanical Engineering, Sardar Vallabhbhai Patel Institute of Technology, Vasad, Gujarat
  • Durgesh Naregalkar Student, Department of Mechanical Engineering, Sardar Vallabhbhai Patel Institute of Technology, Vasad, Gujarat
  • Snehal Patel Student, Thermal System Design, Department of Mechanical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat
  • Ashish A. Patel Student, Thermal System Design, Department of Mechanical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat,

DOI:

https://doi.org/10.37591/jorachv.v6i1.619

Keywords:

Inverse Heat Transfer, heat flux, thermal engineering, preheating

Abstract

Direct measurement of heat flux at the surface of a surface subjected to extreme heat using conventional or traditional methods is an inexpedient task; but it can be estimated by an inverse analysis utilizing transient temperature recordings taken at specific location beneath the heated surface. The problem on Inverse Heat Transfer (IHT) depends upon the heat flux and various temperature measurements for the approximation of variable quantities appearing in the analysis of physical problems in thermal engineering. The heat flux obtained by the calculation are used for the heat recovery process which signifies that heat flux is used for the preheating of steel which is necessary for reduction of distortion, elimination of crack, prevention of shrinkage and other losses in the steel industry. So, it becomes necessary that preheating for the purpose of calculations, a common preheating temperature of 480°C is taken and calculations are done as per volume of steel which can be preheated up to 480°C from a room temperature of 30°C.

References

Harsh Dalal, Kaiwal Shah, Kevin Patel, Durgesh Naregalkar, Snehal Patel, Ashish A. Patel. Inverse Heat Transfer Analysis Applied to Heat Treatment Process. Journal of Refrigeration, Air Conditioning, Heating and Ventilation. 2019; 6(1):14–19p.

Downloads

Published

2019-05-28

Issue

Vol. 6 No. 1 (2019)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.