Design and Thermal Analysis of Y2O3ZrO2 Ceramic Coated IC Engine Piston Based on FEA

Authors

  • Abdul Jabbar Ansari Assistant Professor, Department of Mechanical Engineering, Bansal Institute of Engineering & Technology Lucknow, Uttar Pradesh, India

DOI:

https://doi.org/10.37591/jorachv.v8i2.1219

Keywords:

Finite element analysis, thermal barrier coatings, coating of piston, thermal analysis of piston

Abstract

This paper includes the design and thermal analysis of an uncoated & coated IC engine piston made of aluminium-silicon alloy. Thermal analysis is performed on pistons cylinder comprised of aluminium alloys covered with artistic material (Y2O3ZrO2). The bonding is done by unique material (Ni-Cr-Al). Designing is done by appropriate machine design approach and the piston dimensions are determined by finite element analysis (FEA). FEA was performed using ANSYS. The coating effects on the thermal behaviour of the pistons are also investigated.

References

Li CH. Piston thermal deformation and friction considerations (No. 820086) [SAE technical paper]; 1982.

Hejwowski T, Weroński A. The effect of thermal barrier coatings on diesel engine performance. Vacuum. 2002;65(3–4):427–32. doi: 10.1016/S0042–207X(01)00452–3.

Silva FS. Fatigue on engine pistons–A compendium of case studies. Eng Fail Anal. 2006;13(3):480–92. doi: 10.1016/j.engfailanal.2004.12.023.

Kumar U, Karimi MN. Low grade waste heat recovery for optimized energy efficiencies and enhanced sustainability in process industries: a comprehensive review. Int J Multidiscip Sci Eng. 2014;5.

Pierz PM. Thermal barrier coating development for diesel engine aluminum pistons. Surf Coatings Technol. 1993;61(1–3):60–6. doi: 10.1016/0257–8972(93)90203-Z.

Singh L, Rawat SS, Hasan T, Kumar U. Finite element analysis of piston in ANSYS. Int J Mod Trends Eng Res. 2015;2.

Cerit M. Thermo mechanical analysis of a partially ceramic coated piston used in an SI engine. Surf Coatings Technol. 2011;205(11):3499–505. doi: 10.1016/j.surfcoat.2010.12.019.

Bhandari VB. Design of machine elements. Tata: McGraw-Hill Education; 2010.

Toyama K, Yoshimitsu T, Nishiyama T, Shimauchi T, Nakagaki T. Heat insulated turbocompound engine. SAE Trans. 1983:1086–97.

Miyairi Y. Computer simulation of an LHR DI diesel engine. SAE Trans. 1988:282–94.

Khurmi RS, Gupta JK. A Textbook of Machine Design. Eurasia; 2005.

Yingkui G, Zhibo Z. Strength analysis of diesel engine crankshaft based on PRO/E and ANSYS. 2011 Third International Conference on Measuring Technology and Mechatronics Automation. 2011, pp. 362-364, doi: 10.1109/ICMTMA.2011.661.

Hohenberg GF. Advanced approaches for heat transfer calculations. SAE Trans. 1979:2788–806.

Cerit M, Coban M. Temperature and thermal stress analyses of a ceramic-coated aluminum alloy piston used in a diesel engine. Int J Therm Sci. 2014;77:11–8. doi: 10.1016/j.ijthermalsci.2013.10.009.

Prasad R, Samria NK. Heat transfer and stress fields in the inlet and exhaust valves of a semi-adiabatic diesel engine. Comput Struct. 1990;34(5):765–77. doi: 10.1016/0045–7949(90)90144-Q.

Downloads

Published

2022-01-18

Issue

Vol. 8 No. 2 (2021)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.