Anthropogenic Wind Mill

Authors

  • Hindinamani S
  • Bhirudev H

Abstract

Electricity can also be generated from artificially generated wind using blower.
A prototype model can be developed which generates constant power from artificially generated constant flow of wind. Artificially generated air is flown through wind mill which is coupled to an alternator in such a way that constant electricity is generated. This wind mill is called the anthropogenic wind mill (AWM). Anthropogenic is basically a Greek word which means “artificial.” This project tries to give that mass flow rate at inlet and outlet are approximately the same, but velocity of air at the outlet is four times of velocity at the inlet.

 

Keywords:AWM, KE, CFM, WE

References

Sarkar Asis,KumarDhiren. Wind turbine blade efficiency and power calculation with electrical analogy.International Journal of Scientific and Research Publications. 2012;2(2):1–5p.

Atre Pranav C,ThundilKaruppa Raj R.Numerical design and parametric optimization of centrifugal fans with airfoil blade impellers.Research Journal of Recent Sciences.October 2012;1:7–11p.ISSN 2277–2502.

BaloniBeena D,ChanniwalaSalim A. Numerical investigation of the flow pattern within the impeller of a centrifugal blower.3rd International Conference on Mechanical, Automotive and Materials Engineering (ICMAME2013),Singapore.April 29–30, 2013; 92–96p.

TurturClaus W.Conversion of the vacuum–energy of electromagnetic zero point oscillations into classical mechanical energy.The General Science Journal.23 Aug 2010; 1–124p.ISSN: 1916–5382.

Massimo Canale, Lorenzo Fagiano, Mario Milanese. High altitude wind energy generation using controlled power kites.IEEETransactions on Control Systems Technology.March 2010; 18(2): 279–93p.

Mittal Rajveer, Sandhu KS,Jain D K. An overview of some important issues related to wind energy conversion system (WECS).International Journal of Environmental Science and Development.October 2010; 1(4):367–75p.ISSN:2522–9833.

Pathak Yogesh R, BaloniBeena D,ChanniwalaS A. Numerical simulation of centrifugal blower using CFX.International Journal of Electronics, Communication & Soft Computing Science and Engineering.April 2012;242–7p.ISSN: 2277–9477.

Fan and Blower Energy Efficiency Reference Guideby “Sask Power.” 1–147p.

Downloads

Published

2020-07-03

Issue

Vol. 1 No. 2 (2014)

Section

Research Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.