Open Access Open Access  Restricted Access Subscription or Fee Access

Fatigue Design of Anode Supports on Offshore Structures

Ozgur Ozguc

Abstract


This paper addresses the fatigue analyses results for external and internal anodes’ attachments on the offshore structures using finite element analysis, where a simplified empirical formula is also recommended. For anodes that may become subject to significant forces during installation and operation, the design of anode fastening devices shall be addressed in early design stage. Doubler and/or gusset plates may be required for large anodes. The anode steel should be welded to doublings plates (pad) to avoid welding on the main plate in case of replacing of anodes. Anodes should be welded to structural elements with low stress level. Further anodes in tanks should preferably be welded to the web plate of transverse members.

 

Keywords:Fatigue design, anode support, finite element analysis, hot spot stress S–N curve

Cite this Article

Ozgur Ozguc, Fatigue Design of Anode Supports on Offshore Structures, Journal of Offshore Structure and Technology, 2015; 2(2): 52–63p.


Full Text:

PDF

References


Bergan PG, Lotsberg I. Advances in fatigue assessment of FPSOs. In OMAE-FPSO’04-0012, International Conference, Houston, TX. 2004.

DNV Classification Notes No.30.7, Fatigue Assessment of Ship structures, June 2010.

DNV-RP-C203, Fatigue Design of Offshore Steel Structures, October 2012.

DNV-RP-C206, Fatigue Methodology of Offshore Ships, October 2012.

Fricke W. Recommended hot spot analysis procedure for structural details of FPSO’s and ships based on round-robin FE analyses. In Proceedings of the 11th ISOPE, Stavanger. Also in Int J Offshore Polar Eng, 12(1), March 2001.

Kang SW, Kim WS, Paik YM. Fatigue strength of fillet welded steel structure under out-of-plane bending. International Welding/Joining Conference, Korea. 2002.

Lotsberg I. Recommended methodology for analysis of structural stress for fatigue assessment of plated structures. OMAE-FPSO’04-0013, International Conference, Houston, TX. 2004

Lotsberg I, Askheim DØ, Haavi T et al. Full scale fatigue testing of side longitudinals in FPSOs. In: Proceedings of the11th ISOPE, Stavanger. 2001

Maddox S. Recommended design S–N curves for fatigue assessment of FPSOs. In: Proceedings of the 11th ISOPE, Stavanger. 2001

Storsul R, Landet E, Lotsberg I et al. Convergence analysis for welded details in ship shaped structures. In OMAE- FPSO’04-0016, International Conference, Houston, TX. 2004a.

Storsul R, Landet E, Lotsberg I et al. Calculated and measured stress at welded connections between side longitudinals and transverse frames in ship shaped structures. In Proceedings of OMAE-FPSO’04-0017, International Conference, Houston, TX. 2004b.


Refbacks

  • There are currently no refbacks.