Open Access Open Access  Restricted Access Subscription or Fee Access

Modelling and Structural Analysis of Ice Strengthened Vessel

Ozgur Ozguc

Abstract


In this paper, one global and one local FE-model are developed in order to calculate the response of ice loading on an ice strengthened 100.000 DWT oil carrier. A global analysis is performed by applying loads in two different areas in the bow region. The deformations of the global model are used as boundary conditions in the analysis of the local model. In each of the two areas, the loads are applied as stiffener loads (symmetrically around a longitudinal stiffener) and as plate loads (between two stiffeners). The longitudinal extension of the loads is one and two frame spacings. Further, eight different load cases are investigated. Membrane stresses are documented in five different points for all load cases. It is drawn that the response is equivalent in the forward and aft loading area. The longitudinal extension of the load affects the stress in longitudinal direction, especially at the stiffener midspan. Compared to plate loading, stiffener loading nearly halves the transverse stress at the plate midspan while the longitudinal stress in the stiffener increases by magnitude.

Keywords: Ice loads, global FE model, local FE model, ice-strengthened tanker, structural deformation

 

Cite this Article
Ozgur Ozguc. Modelling and Structural Analysis of Ice Strengthened Vessel. Journal of Offshore Structure and Technology. 2017; 4(1): 11–20p.


Full Text:

PDF

References


Wang G, Basu R, Chavda D, et al. Rationalization of Design of Side Structure of Ice-strengthened Tankers. International Society of Offshore and Polar Engineers (ISOPE). 2005.

Wang G, Wiernicki CJ. Using Nonlinear Finite Element Method to Design Ship Structures for Ice Loads. Transactions SNAME. 2005; 112: 113–116p.

ABS. Guidance Notes on ICE Class. 2008.

Kujala P. Safety of Ice-Strengthened Shell Structures of Ships Navigating in the Baltic Sea. In: Guedes Soares, Parunov, editors. Advanced Ship Design for Pollution Prevention. London, UK: Taylor & Francis Group; 2010.

Hakala MK. A Nonlinear Finite Element Analysis of an Ice-Strengthened Ship Shell Structure. Comput Struct. Oct 1980; 12(4): 541–547p.

Ghoneim GA, Pen BF. Application of Recent Ice Class Requirements for Arctic E&P Offshore Structure. Proceedings of the Nineteenth (2009) International Offshore and Polar Engineering Conference, Osaka, Japan. Jun 21–26, 2009.

Wang B, Yu HC, Basu R. Ship and Ice Collision Modeling and Strength Evaluation of LNG Ship Structure. 27th International Conference on Offshore Mechanics and Arctic Engineering, OMAE2008-57134. 2008; 911–918p.

Valanto P. On Computed Ice Load Distributions, Magnitudes and Lengths on Ship Hulls moving in Level Ice. 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC), At Lulea, Sweden. 2009.

Parunov J, Corak M. Faculty of Mechanical Engineering and Naval Architecture. University of Zagreb; 2010.

Daley C, Kim HW. Ice Collision Forces Considering Structural Deformation. 29th International Conference on Ocean, Offshore and Arctic Engineering. Shanghai, China. Jun 6–11, 2010; 4.

Su B, Riska K, Moan T. A Numerical Method for the Prediction of Ship Performance in Level Ice. Cold Reg Sci Technol. 2010; 60(3): 177–188p.

Torstein M. Iceberg Shape Characterization for Damage Assessment of Accidental Impacts with Ships and Offshore Structures. Master Thesis, Institutt for marin teknikk; 2013.

SESAM User Manual. Xtract. May 1st, 2005.


Refbacks

  • There are currently no refbacks.