Role of Hot-Injection Technique for the Synthesis of Phase-Pure Kesterite CZTS Nanocrystals for Biosensing Applications

Authors

  • Shefali Jain CSIR-National Physical Laboratory, New Delhi 110020, India.
  • Pooja Semalti CSIR-National Physical Laboratory, New Delhi 110020, India.
  • S P Singh CSIR-National Physical Laboratory, New Delhi 110020, India.
  • Shailesh Narain Sharma CSIR-National Physical Laboratory, New Delhi-110012, India.

Keywords:

Enhanced bandgap CZTS, glucose biosensor, hot injection technique, ligand exchange.

Abstract

Main Focus in this present work, is biosensing application of CZTS nanoparticle instead of established and mainstream photovoltaics application. Here, biocompatible CZTS have been synthesized using butylamine. The capping effect has been explored in two ways first, post synthesis ligand exchange from TOPO-capped CZTS (Ex-situ) and during synthesis (In-situ). The sample obtained after ex-situ ligand exchange was analysed for its stability using x-ray diffraction method (XRD), transmission electron microscopy (TEM) and photoluminescence (PL) spectroscopy. It has been found that the original kesterite structure was distorted during Ex-situ ligand exchange. However, the In-situ synthesized butylamine capped CZTS were observed to be pure kesterite phased, spherical shaped nanoparticles with enhanced bandgap of 2.65 eV desirable for sensing applications. These nanoparticles were then explored for glucose-sensing application using PL-quenching method. Glucose sensing was further confirmed by fabricating bioelectrode glucose oxidase/CZTS/ITO/glass. The electrochemical analyses of this bioelectrode was done and found to exhibits a good linearity over a wide range of 0-200 μM glucose concentration.

Author Biographies

Shefali Jain, CSIR-National Physical Laboratory, New Delhi 110020, India.

Academy of Scientific and Innovative Research (AcSIR), New Delhi

Pooja Semalti, CSIR-National Physical Laboratory, New Delhi 110020, India.

Academy of Scientific and Innovative Research (AcSIR), New Delhi

S P Singh, CSIR-National Physical Laboratory, New Delhi 110020, India.

Academy of Scientific and Innovative Research (AcSIR), New Delhi

Shailesh Narain Sharma, CSIR-National Physical Laboratory, New Delhi-110012, India.

Academy of Scientific and Innovative Research (AcSIR), New Delhi

References

Tiong VT, Bell J, Wang H. One-step synthesis of high quality kesterite Cu2ZnSnS4 nanocrystals–a hydrothermal approach. Beilstein journal of nanotechnology. 2014;5:438.

Abusnina MM. Synthesis and characterization of kesterite Cu 2 ZnSnS 4 (CZTS) thin films for solar cell application: University of Denver; 2016.

Reshak A, Nouneh K, Kityk I, Bila J, Auluck S, Kamarudin H, et al. Structural, electronic and optical properties in earth-abundant photovoltaic absorber of Cu2ZnSnS4 and Cu2ZnSnSe4 from DFT calculations. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE. 2014;9(2):955-74.

Zhang R, Szczepaniak SM, Carter NJ, Handwerker CA, Agrawal R. A versatile solution route to efficient Cu2ZnSn (S, Se) 4 thin-film solar cells. Chemistry of Materials. 2015;27(6):2114-20.

Yu K, Carter EA. A strategy to stabilize kesterite CZTS for high-performance solar cells. Chemistry of Materials. 2015;27(8):2920-7.

Schorr S. Structural aspects of adamantine like multinary chalcogenides. Thin Solid Films. 2007;515(15):5985-91.

Rana TR, Shinde N, Kim J. Novel chemical route for chemical bath deposition of Cu2ZnSnS4 (CZTS) thin films with stacked precursor thin films. Materials Letters. 2016;162:40-3.

Ennaoui A, Lux-Steiner M, Weber A, Abou-Ras D, Kötschau I, Schock H-W, et al. Cu2ZnSnS4 thin film solar cells from electroplated precursors: Novel low-cost perspective. Thin Solid Films. 2009;517(7):2511-4.

Daranfed W, Aida M, Attaf N, Bougdira J, Rinnert H. Cu2ZnSnS4 thin films deposition by ultrasonic spray pyrolysis. Journal of alloys and compounds. 2012;542:22-7.

Tanaka K, Fukui Y, Moritake N, Uchiki H. Chemical composition dependence of morphological and optical properties of Cu2ZnSnS4 thin films deposited by sol–gel sulfurization and Cu2ZnSnS4 thin film solar cell efficiency. Solar Energy Materials and Solar Cells. 2011;95(3):838-42.

Chen S, Tao H, Shen Y, Zhu L, Zeng X, Tao J, et al. Facile synthesis of single crystalline sub-micron Cu 2 ZnSnS 4 (CZTS) powders using solvothermal treatment. RSC Advances. 2015;5(9):6682-6.

Shin S, Park C, Kim C, Kim Y, Park S, Lee J-H. Cyclic voltammetry studies of copper, tin and zinc electrodeposition in a citrate complex system for CZTS solar cell application. Current Applied Physics. 2016;16(2):207-10.

Guo Q, Hillhouse HW, Agrawal R. Synthesis of Cu2ZnSnS4 nanocrystal ink and its use for solar cells. Journal of the American Chemical Society. 2009;131(33):11672-3.

Jain S, Chawla P, Sharma SN, Singh D, Vijayan N. Efficient Colloidal Route to Pure Phase Kesterite Cu 2 ZnSnS 4 (CZTS) Nanocrystals with Controlled Shape and Structure. Superlattices and Microstructures. 2018.

Riha SC, Parkinson BA, Prieto AL. Solution-based synthesis and characterization of Cu2ZnSnS4 nanocrystals. Journal of the American Chemical Society. 2009;131(34):12054-5.

Mali SS, Patil BM, Betty CA, Bhosale PN, Oh YW, Jadkar SR, et al. Novel synthesis of kesterite Cu2ZnSnS4 nanoflakes by successive ionic layer adsorption and reaction technique: characterization and application. Electrochimica Acta. 2012;66:216-21.

Washio T, Shinji T, Tajima S, Fukano T, Motohiro T, Jimbo K, et al. 6% Efficiency Cu 2 ZnSnS 4-based thin film solar cells using oxide precursors by open atmosphere type CVD. Journal of Materials Chemistry. 2012;22(9):4021-4.

Jain S, Sharma SN. Compositional Optimization of Photovoltaic Grade Cu2ZnSnS4 (CZTS) Films Synthesized by Colloidal Route. Recent Trends in Materials and Devices: Springer; 2017. p. 331-8.

Saadeldin M, Soliman H, Ali H, Sawaby K. Optical and electrical characterizations of nanoparticle Cu2S thin films. Chinese Physics B. 2014;23(4):046803.

Tao J, Chen L, Cao H, Zhang C, Liu J, Zhang Y, et al. Co-electrodeposited Cu 2 ZnSnS 4 thin-film solar cells with over 7% efficiency fabricated via fine-tuning of the Zn content in absorber layers. Journal of Materials Chemistry A. 2016;4(10):3798-805.

Abdelhady AL, Ramasamy K, Malik MA, O'Brien P, Haigh SJ, Raftery J. New routes to copper sulfide nanostructures and thin films. Journal of Materials Chemistry. 2011;21(44):17888-95.

Jain S, Singh A, Gupta G, Vijayan N, Sharma SN. Precursor ratio optimizations for the synthesis of colloidal CZTS nanoparticles for photocatalytic degradation of malachite green. Journal of Physics and Chemistry of Solids. 2018.

Koyun A, Ahlatcıoğlu E, İpek YK. Biosensors and their principles. A Roadmap of Biomedical Engineers and Milestones: InTech; 2012.

Yoo E-H, Lee S-Y. Glucose biosensors: an overview of use in clinical practice. Sensors. 2010;10(5):4558-76.

Jain S, Sharma SN, Kumar M. Synthesis and properties of CdSe Quantum Dot sensitized ZnO nanocomposites. Physica E: Low-dimensional Systems and Nanostructures. 2011;44(3):555-64.

Hermanson G. Bioconjugate Techniques 2nd edn Academic Press. London, UK. 2008.

Wang J. Electrochemical glucose biosensors. Chemical reviews. 2008;108(2):814-25.

Published

2019-02-27

Issue

Section

Research Article