A Review on Software Analysis of Exhaust Thermoelectrical Generator

Authors

  • Kumar Nigam Mani Research Scholar, Department of Mechanical Engineering, Bagula Mukhi College of Technology, Bhopal, Madhya Pradesh,
  • Dharmendra Singh Rathore Professor, Department of Mechanical Engineering, Bagula Mukhi College of Technology, Bhopal, Madhya Pradesh,

DOI:

https://doi.org/10.37591/jorachv.v6i3.791

Keywords:

ANSYS Software, automobile, computational fluid dynamics, electric generator, energy simulation, heat energy, simulation analysis, TEG

Abstract

Nowadays, heating and cooling is a major issue in the environment due to the global warming. Due to exhaust gases and unwanted pollution, TEG (thermoelectric generator) is a concept to utilize the heat energy of an engine for other works purposes. A major part of the energy is being engaged in such issues. Here, a study of conservation is being followed. TEG is a mechanical device that converts heat energy into electrical energy. Here, the device has been engaged into an exhaust system for reuse of heat energy for further electrical parts of an automobile or a generator. However, for determining the surface heat convection due to the lack of available methods, it is difficult to make accurate energy simulation and design. Here, in this study, we will perform a software simulation for the performance check-up of the system. ANSYS Software will be used for simulation and modeling, under ANSYS software will use Computational Fluid Dynamics (CFD Fluent) workbench as simulation analysis.

References

Kumar Nigam Mani, Dharmendra Singh Rathore. A Review on Software Analysis of Exhaust Thermoelectrical Generator. Journal of Refrigeration, Air Conditioning, Heating and Ventilation. 2019; 6(3): 12–19p.

Downloads

Published

2019-12-04

Issue

Vol. 6 No. 3 (2019)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.