Design of Ventilation and Air Conditioning for 50 Ton Bollard Pull Utility Tug Built for Indian Navy

Authors

  • K. Lakshmi Chaitanya R.V.R & J.C College of Engineering
  • K. Srinivas
  • K. Jagadish Chandra Bose

Keywords:

ACCA, SMACNA, MMD, IRS, SOLAS, AIRAH, HVAC, NURBS

Abstract

Abstract

The current work deals with the design of ventilation and air conditioning for utility tug which is built for the Indian navy by HSL considering previously built values of the tug, which was approved. The main purpose of this project is to reckon the heat load calculations for air-conditioning and ventilation heat load calculations of the utility tug. The calculations were performed on the basis of some professional organizations like ACCA, SMACNA, MMD, IRS, SOLAS, AIRAH, and some well known industrial journals. Apart from these calculations, the work deals with the material estimation for the ducting inside the tug. So, this entire work gives us the idea about heat load calculations, along with the material required for performing the duct work inside the tug accommodation chambers, with drafting of the ventilation ducting arrangement for accommodation inside utility tug.

Keywords: ACCA, SMACNA, MMD, IRS, SOLAS, AIRAH, HVAC, NURBS

Cite this Article

Lakshmi Chaitanya K, Srinivas K, Jagadish Chandra Bose K. Design of Ventilation and Air Conditioning for 50 Ton Bollard Pull Utility Tug Built for Indian Navy. Journal of Refrigeration, Air Conditioning, Heating and Ventilation. 2016; 3(1): 23–31p.



 

Published

2016-04-06

Issue

Vol. 3 No. 1 (2016)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.