Review on Behavior of HVAC System for Indoor Thermal Comfort
Abstract
Keywords
Full Text:
PDFReferences
S. O. D. Niaki, M. Pourfallah, and A. Z. Ghadi, “Feasibility and investigation of residential HVAC system with combined ground source heat pump and solar thermal collectors in different climates of Iran,” Int. J. Thermofluids, vol. 20, no. July, p. 100427, 2023, doi: 10.1016/j.ijft.2023.100427.
Q. Jiang, J. Chen, J. Hou, and Y. Liu, “Research on building energy management in HVAC control system for university library,” Energy Procedia, vol. 152, pp. 1164–1169, 2018, doi: 10.1016/j.egypro.2018.09.152.
M. Alkhalaf, A. Ilinca, and M. Y. Hayyani, “CFD Investigation of Ventilation Strategies to Remove Contaminants from a Hospital Room,” Designs, vol. 7, no. 1, 2023, doi: 10.3390/designs7010005.
M. W. Ahmad, M. Mourshed, B. Yuce, and Y. Rezgui, “Computational intelligence techniques for HVAC systems: A review,” Build. Simul., vol. 9, no. 4, pp. 359–398, 2016, doi: 10.1007/s12273-016-0285-4.
W. Zheng et al., “COVID-19 Impact on Operation and Energy Consumption of Heating, Ventilation and Air-Conditioning (HVAC) Systems,” Adv. Appl. Energy, vol. 3, no. May, p. 100040, 2021, doi: 10.1016/j.adapen.2021.100040.
Y. M. Abdullatif, A. Sodiq, T. Al-Ansari, N. N. Nassar, and A. I. Amhamed, “Optimizing chemisorption based direct air capture unit efficiency in HVAC systems: A study on the impact of DAC location and adsorption conditions as a response to the climate crisis and indoor air quality,” Energy Convers. Manag., vol. 291, no. March, p. 117280, 2023, doi: 10.1016/j.enconman.2023.117280.
F. Zhang, N. Saeed, and P. Sadeghian, “Deep learning in fault detection and diagnosis of building HVAC systems: A systematic review with meta analysis,” Energy AI, vol. 12, no. January, p. 100235, 2023, doi: 10.1016/j.egyai.2023.100235.
L. Liang et al., “Comparative analysis of technical requirements for Heating, Ventilating, and Air Conditioning (HVAC) systems in high-biocontainment facility standards,” Biosaf. Heal., vol. 5, no. 1, pp. 1–7, 2023, doi: 10.1016/j.bsheal.2022.12.003.
A. Jahanbin and G. Semprini, “On the optimisation of age of the air in the breathing zone of floor heating systems: The role of ventilation design,” Energy Built Environ., no. July, 2022, doi: 10.1016/j.enbenv.2022.08.005.
A. Surapaneni and H. Company, “HVAC Design Considerations and Indoor Environmental Optimizations for a Cannabis Flowering Room,” no. April, 2023.
P. Patel, R. Karmur, G. Choubey, and S. Tripathi, Recent Trends in Fluid Dynamics Research, no. January. 2022. doi: 10.1007/978-981-16-6928-6.
H. Aulia, R. Budi, T. Faiz Dhiahaqi, and A. C. Ramadhani, “HVAC System Functionality with 3 Parameters such as Geometry Design,Duct Positions, and Cooling Time on Room Temperature Class III InpatientRoom at Bitung Hospital Based on Computational Fluid DynamicsSimulation,” no. January, 2023, [Online]. Available: https://www.researchgate.net/publication/367347494
T. Tsoutsos, S. Tournaki, C. A. De Santos, and R. Vercellotti, “Nearly zero energy buildings application in mediterranean hotels,” Energy Procedia, vol. 42, pp. 230–238, 2013, doi: 10.1016/j.egypro.2013.11.023.
U. B. E. S. C. F. D. Co-simulation, “Case Study : Impacts of Air-Conditioner Air Supply Strategy on,” 2023.
S. Konis, K. and Selkowitz, Effective Daylighting with High-Performance Facades, Emerging Design Practices. 2017.
F. Ascione, R. F. De Masi, M. Mastellone, and G. P. Vanoli, “The design of safe classrooms of educational buildings for facing contagions and transmission of diseases: A novel approach combining audits, calibrated energy models, building performance (BPS) and computational fluid dynamic (CFD) simulations,” Energy Build., vol. 230, p. 110533, 2021, doi: 10.1016/j.enbuild.2020.110533.
F. Hou, J. Ma, H. H. L. Kwok, and J. C. P. Cheng, “Prediction and optimization of thermal comfort, IAQ and energy consumption of typical air-conditioned rooms based on a hybrid prediction model,” Build. Environ., vol. 225, no. November, 2022, doi: 10.1016/j.buildenv.2022.109576.
R. T. Wang, J. C. Wang, and S. L. Chen, “Investigations on Temperatures of the Flat Insert Mold Cavity Using VCRHCS with CFD Simulation,” Polymers (Basel)., vol. 14, no. 15, 2022, doi: 10.3390/polym14153181.
T. Lim and D. D. Kim, “Thermal Comfort Assessment of the Perimeter Zones by Using CFD Simulation,” Sustainability, vol. 14, no. 23, p. 15647, 2022, doi: 10.3390/su142315647.
Y. D. Torres et al., “Heating ventilation and air-conditioned configurations for hotelsan approach review for the design and exploitation,” Energy Reports, vol. 6, no. April, pp. 487–497, 2020, doi: 10.1016/j.egyr.2020.09.026.
DOI: https://doi.org/10.37591/jorachv.v10i2.1526
Refbacks
- There are currently no refbacks.