Open Access Open Access  Restricted Access Subscription or Fee Access

Analysis of Thermo Hydraulic Performance of Artificial V-Rib Roughness of Solar Air Heater: A Review

Mithilesh Kumar, K.D.P. Singh

Abstract


Solar air heaters (SAHs) are the simplest energy conversion device which transforms incoming solar radiation to thermal energy. In traditional SAH the convective heat transfer rate is low. To improve heat transfer rate the artificial rib roughness is employed on the absorber plate. Although rib roughness increases the heat transfer rate, as well as the pressure drop due to friction. So in order to achieve maximum increment in thermo hydraulic performance it is vital to find optimum rib geometrical parameters. Rib roughness is partite into four categories: (1) transverse, (2) inclined, (3) V shaped and (4) arc shape. This review article discusses the different V shaped rib roughness and their effect on performance of SAH.

Keywords


Solar air heater, heat transfer, friction factor, thermo hydraulic performance, V shaped rib

Full Text:

PDF

References


Han JC, Zhang YM, Lee CP. Augmented heat transfer in square channels with parallel, crossed,

and V-shaped angled ribs. J. Heat Transfer (1991); 113(3):590–596.

Lau SC, Kukreja RT, Mcmillin RD. Effects of V-shaped rib arrays on turbulent heat transfer and

friction of fully developed flow in a square channel. Int. J. Heat Mass Transf. 1991; 34 (7):1605–

Olsson CO, Sunden B. Thermal and hydraulic performance of a rectangular duct with multiple Vshaped ribs. J Heat Transfer (1998); 120:1072–1077.

Momin AME, Saini JS, Solanki SC. Heat transfer and friction in solar air heater duct with Vshaped rib roughness on absorber plate. Int. J. Heat Mass Transf. (2002); 45(16):3383–3396.

Karwa R Experimental studies of augmented heat transfer and friction in asymmetrically heated

rectangular ducts with ribs on the heated wall in transverse, inclined, V-continuous and V-discrete

pattern, Int. Commun. Heat Mass Transf. (2003); 30 (2):241–250.

Hans VS, Saini RP, Saini JS. Heat transfer and friction factor correlations for a solar air heater

duct roughened artificially with multiple v-ribs. Sol. Energy (2010); 84(6):898–911.

Singh S, Chander S, Saini JS. Thermal and effective efficiency-based analysis of discrete V-down

rib-roughened solar air heaters. J. Renew. Sustain. Energy. (2011); 3(2): 023107.

Patil AK, Saini JS, Kumar K. Heat Transfer and Friction Characteristics of Solar Air Heater Duct

Roughened by Broken V-shape Ribs Combined with Staggered Rib Piece. Journal of Renewable

and Sustainable Energy (2012) 4(1):013115.

Maithani R, Saini JS. Heat transfer and friction factor correlations for a solar air heater duct

roughened artificially with V-ribs with symmetrical gaps. Exp. Therm. Fluid Sci. (2016); 70:

–227.

Kumar A, Saini RP, Saini JS. Experimental investigation on heat transfer and fluid flow

characteristics of air flow in a rectangular duct with Multi V-shaped rib with gap roughness on the

heated plate. Sol. Energy. (2012); 86(6):1733– 1749.

Tamna S, Skullong S, Thianpong C et al. Heat transfer behaviors in a solar air heater channel with

multiple V-baffle vortex generators. Sol. Energy (2014); 110:720–735.

Ravi RK, Saini RP. Experimental investigation on performance of a double pass artificial

roughened solar air heater duct having roughness elements of the combination of discrete multi V

shaped and staggered ribs. Energy (2016); 116:507-516.

Ravi RK, Saini RP. Nusselt number and friction factor correlations for forced convective type

counter flow solar air heater having discrete multi V shaped and staggered rib roughness on both

sides of the absorber plate. Appl. Therm. Eng. (2018); 129:735–746.

Deo, NS. Chander S, Saini JS. Performance analysis of solar air heater duct roughened with multi

gap V-down ribs combined with staggered ribs. Renew. Energy. (2016); 91:484–500.

Jin D, Zhang M, Wang P et al. Numerical investigation of heat transfer and fluid flow in a solar

air heater duct with multi V-shaped ribs on the absorber plate. Energy (2015); 89:178-190.

Jin D, Quan S, Zuo J et al. Numerical investigation of heat transfer enhancement in a solar air

heater roughened by multiple V-shaped ribs. Renewable Energy (2019); 134:78-88.

Misra R, Singh J, Jain SK et al. Prediction of behavior of triangular solar air heater duct using Vdown rib with multiple gaps and turbulence promoters as artificial roughness: A CFD analysis,

Intl. Journal of Heat and Mass transfer(2020);162:120376.

Promvonge P. Skullong S. Thermo-hydraulic performance in heat exchanger tube with V-shaped

winglet vortex generator, Applied Thermal Engineering (2020); 164:114424.

Singh S, Chander S, Saini JS. Investigations on thermo-hydraulic performance due to flow-attackangle in V-down rib with gap in a rectangular duct of solar air heater. Appl. Energy.(2012); 97:

–912.

Sharma A, Varun, Kumar P et al. Heat transfer and friction characteristics of double pass solar air

heater having V-shaped roughness on the absorber plate. Journal of renewable and sustainable

energy (2013); 5(2):023109.


Refbacks

  • There are currently no refbacks.