Open Access Open Access  Restricted Access Subscription or Fee Access

A Review on Thermodynamic Analysis of thermal Heat Dissipating Fins

Tarun Kumar Soni, Dharmendra Rathore


The Engine chamber is one of the essential motor components, that is exposed to extreme temperature varieties and thermal burdens. Balances are set on the outer layer of the chamber to improve the measure of Heat & mass transfer by convection. For thermal investigation of the motor chamber blades, it is more gainful to know the Heat & mass transfer dissemination inside the chamber. Present review has been done to improve information about the different investigates done lately which show that Heat & mass transfer by balances rely upon assortment of balances, balance pitch, blade format, wind speed, texture and environment circumstances. Writing review shows that Heat & mass transfer is improved through broadened surfaces and the thermal coefficient is influenced by changing cross segment of the balances. This review is valuable to perceive the better math and material for the balances for higher thermal dispersal rate and motor cooling.


Convection, Fins, Heat dissemination, Thermal, investigation, Simulations.

Full Text:



Alshabbani, "CFD Simulation of Unsteady State Thermal Analysis for Circular Fins", Industrial Engineering Letters, Vol. 5, No. 12, 2015.

Arefin, "Thermal Analysis of Modified Pin Fin Heat Sink for Natural Convection", 5th International Conference on Informatics, Electronics and Vision, 2016.

Balendra Singh, Satish Singh, "A Research Paper on Heat Transfer in Notch Fin and UN Notch Fin", International Journal for Research in Applied Science & Engineering Technology (IJRASET), Volume 4 Issue IX, September 2016.

Chaitanya, Suneela Rani, Vijaya Kumar, "Thermal Analysis of Engine Cylinder Fin by Varying Its Geometry and Material", IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Volume 11, Issue 6, 2014, PP 37-44.

Chakrabortya, Luharuka, A. Sirkar, "Thermal Analysis of Semicircular Fins Considering Temperature-dependent Thermal Conductivity and Heat Transfer Coefficient", Indian Chemical Engineer, Taylor and Francis, Vol. 56 No. 3 September 2014, pp. 281–293.

Charan, Srivastav, Bharadwaj, "Thermal Analysis On Rectangular Plate Fin with Perforations Using Ansys", International Journal of Creative Research Thoughts, 2018.

Heat and Mass Transfer. 7 th edition, S.K. Kataria&Sons.

Heat and Mass Transfer. Revised edition, R.K. Rajput, S. Chand Publications.

Kiran Beldar, Avinash Patil,"Design and Analysis of cylinder having longitudinal fins with rectangular notches", International Journal of Scientific Development and Research (IJSDR), 2017.

Kongre, Barde, "A Review Paper on Thermal Analysis and Heat Transfer of Single Cylinder S. I. Engine Fins", International Journal of Engineering Research & Technology (IJERT), Volume 4, Issue 30, 2016.

Kummitha, Reddy, "Thermal Analysis of cylinder block with fins for different materials using ANSYS", ICAAMM, Elsevier, 2016.

Laad, BAkhare, Chaurasia, "Thermal Analysis of Heat Sink with Fins Of Different Configuration Using Ansys Workbench 14.0", International Journal Of Engineering Sciences & Research Technology, volume 5, Issue 6, 2016.

LaxmikantChavan, NiranjanPurane, "Thermal Analysis of Pin Fin using Different Materials and Forms", International Journal of Science and Research (IJSR), Volume 4 Issue 12, December 2015.

M.S. Patel, N.M. Vora, "Thermal Analysis of IC Engine cylinder fins array using CFD", International Journal of Advance Engineering and Research Development (IJAERD) Volume 1, Issue 5, May 2014.

Mayankjain, Mahendra Sankhala, KanhaiyaPatidar,"heat transfer analysis and optimization of fins by Variation in geometry", International Journal of Mechanical and Production Engineering, Volume-5, Issue-7, Jul.-2017.

Mogaji, Owoseni, "Numerical Analysis of Radiation Effect on Heat Flow through Fin of Rectangular Profile", American Journal of Engineering Research (AJER), Volume-6, Issue-10, pp-36–46, 2017.

Mohsen Torabi, Yaghoobi, "Thermal Analysis of the Convective-Radiative Fin with A Step Change In Thickness And Temperature Dependent Thermal Conductivity", Journal Of Theoretical And Applied Mechanics, 51, 3, pp. 593–602, Warsaw 2013.

N.B. Rairker, A.V. Karmankar, R.E. Thombre, "Thermal Analysis of Fin and Tube Heat Exchanger", International Journal of Engineering Research and Applications, Vol. 4, Issue 6, June 2014, pp. 01–05.

Natrayan, Selvaraj, Alagirisamy, "Thermal Analysis of Engine Fins with Different Geometries", International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, Issue 5, May 2016.

Oswal, Jagtap, Mane, "Factors Affecting on Thermal Performance of Fins & Analysis of Fins with ANSYS Icepak", International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 6, June 2015.

Prabisha, Ramesh, "Thermal Performance Evaluation of Heat Sink for Various Fin Profiles", International Journal of Science, Technology & Management, Volume No 04, Special Issue No. 01, March 2015.

Rajesh, Rahamathullah, Malleswara Rao, "design and optimization of engine cylinder fins by varying Geometry and material with thermal analysis", International Journal of Core Engineering & Management, 2017.

S.Ravikumar, Chandra, Harish, "Experimental and Transient Thermal Analysis of Heat Sink Fin for CPU processor for better performance", Materials Science and Engineering, 197, 2017.

Sandeep Kumar, Nitin Dubey, "Investigation and Thermal Analysis of Heat Dissipation Rate of Single Cylinder SI Engine", IJEDR, Volume 5, Issue 2, 2017.

Sangaj, Shinde, Shanediwan, Potdar, Suryawanshi, "Thermal and Parametric Analysis of Pin-Fin", International Research Journal of Engineering and Technology (IRJET), Volume 05, Issue 02, Feb-2018.

Santosh Kansal, PiyushLaad, "Performance & Thermal Analysis of Heat Sink with Fins of Different Configuration Using CFD", International Journal of Scientific & Engineering Research, Volume 6, Issue 6, June-2015.

Saurabh Pathak, Ravikant, "Thermal Analysis of Fins with Varying Geometry of Different Materials", IJSRD-International Journal for Scientific Research & Development, Vol. 4, Issue 03, 2016.

Shrivastava, Upadhyay, "Thermal Analysis of IC Engine Cylinder Block with Fins Perpendicular to the Axis of Piston Movement", International Journal of Mechanical and Industrial Technology, Vol. 3, Issue 2, pp: 139–149, 2016.

Shwin-Chung Wong∗, Wei-Yi Lee, “Numerical study on the natural convection from horizontal finned tubes with small and large fin temperature variations,” International Journal of Thermal Sciences 138 (2019) 116–123, 1290-0729/ © 2018 Elsevier Masson SAS. All rights reserved.


  • There are currently no refbacks.