Wear Characterization of Al/B4C/CNT Composites for Different Alloying Composition
Abstract
Keywords
Full Text:
PDFReferences
Cantor B, Dunne F, Stone I. Metal and Ceramic Matrix Composites. Cornwall: IOP Publishing Ltd.; 2003.
Surappa MK. Aluminum Matrix Composites: Challenges & Opportunities. Sadhana. 2005; 28(1, 2): 319–334p.
Hosking FM, Portillo FF, Wunderlin R, et al. Composites of Aluminum Alloys: Fabrication and Wear Behavior. J Mater Sci. 1982; 17(2): 477–498p.
Hutchings IM. Wear by Particulates. Chem Eng Sci. 1987; 42(4): 869–878p.
Ma ZY, Tjong SC. In-situ Ceramic Particle-Reinforced Aluminum Matrix Composites Fabrication by Reaction Pressing in the TiO2 (Ti)-Al-HB (B2O3) Systems. Metall Mater Trans. 1997; 28(A): 1931–1942p.
Chen R, Iwabuchi A, Shimizu T, et al. The Sliding Wear Resistance Behavior of NiAl and SiC Particles Reinforced Aluminum Alloy Matrix Composites. Wear. 1997; 213(1, 2): 175–184p.
Thakur SK, Dhindaw BK. The Influence of Interfacial Characteristics between SiCp and Mg/Al Metal Matrix on Wear Coefficient of Friction and Microhardness. Wear. 2001; 247(2): 191–201p.
Kumar S, Balasubramanian V. Developing a Mathematical Model to Evaluate Wear Rate of AA7075/SiCp Powder Metallurgy Composites. Wear. 2008; 264(11–12): 1026–1034p.
Modi OP, Yadav RP, Mondal DP, et al. Abrasive Wear of Zinc-Al Alloy-10% Al2O3 Composite through Factorial Design. J Mater Sci. 2001; 36(7): 1601–1607p.
How HC, Baker TN. Dry Sliding Wear Behavior of Saffil-Reinforced AA6061 Composites. Wear. 1997; 210(1–2): 263–272p.
Straffelini G, Bonollo F, Molinari A, et al. Influence of Matrix Hardness on the Sliding Behavior of 20 vol% Al2O3-Particulate Reinforced 6061 Al Metal Matrix Composite. Wear. 1997; 211(2): 192–197p.
Martin A, Rodrigues J, Llorca J. Temperature Effects on the Wear Behavior of Particulate Reinforced Al-Based Composites. Wear. 1999; 225: 615–620p.
Yu SY, Ishii H, Tohgo K, et al. Temperature Dependence of Sliding Wear Behavior in SiC Whisker or SiC Particulate Reinforced 6061 Aluminum Alloy Composite. Wear. 1997; 213(1–2): 21–28p.
Liang YN, Ma ZY, Li SZ, et al. Effect of Particle Size on Wear Behavior of SiC Particulate-Reinforced Aluminum Alloy Composites. J Mater Sci Lett. 1995; 14(2): 114–116p.
Chaudhury SK, Singh AK, Sivaramakrishnan CS, et al. Wear and Friction Behavior of Spray Formed and Stir Cast Al-2Mg11-TiO2 Composites. Wear. 2005; 258(5, 6): 759–767p.
Basvarajappa S, Chandramohan G. Wear Studies on Metal Matrix Composites: A Taguchi Approach. J Mater Sci Technol. 2005; 21(6): 845–850p.
Suresha S, Sridhara BK. Wear Characteristics of Hybrid Aluminium Matrix Composites Reinforced with Graphite and Silicon Particulates. Compos Sci Technol. 2010; 70(11): 1652–1659p.
Kok M. Computational Investigation of Testing Parameter Effects on Abrasive Wear Behavior of Al2O3 Particle Reinforced MMCS using Statistical Analysis. Int J Adv Manuf Technol. 2011; 52(1–4): 207–215p.
Prasad BK, Das S, Jha AK, et al. Factor Controlling the Abrasive Wear Response of Zinc Based Alloys Silicon Carbide Particle Composite. Composite A. 1997; 28(4): 301–308p.
Refbacks
- There are currently no refbacks.