Open Access Open Access  Restricted Access Subscription or Fee Access

Microfluidic Features in Fluid Mechanics for Bioengineering Applications

Subhadeep Mukhopadhyay

Abstract


In this work, a single SU-8 based glass microfluidic device is fabricated by the mask less lithography and indirect bonding technique. The sealing is performed by author during the hard baking in maskless lithography. Dyed water is prepared as working liquid in this work. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used by the author to record the surface-driven capillary flow of dyed water. In future, this experimental work may be useful to manipulate the working liquid inside any SU-8 based laboratory-on-a-chip system for bioengineering applications, for example, filtration of blood cells from human whole blood.

Keywords


SU-8; Maskless lithography; Indirect bonding; Dyed water; Bioengineering

Full Text:

PDF

References


C. C. Chang, R. J. Yang, “Electrokinetic Mixing in Microfluidic Systems”, Microfluid Nanofluid,Vol. 3 (2007) Pages 501–525.

F. Mugele, J. C. Baret, “Electrowetting: from Basics to Applications”, Journal of Physics:Condensed Matter, Vol. 17 (2005) Pages R705–R774.

R. Pethig, “Review Article-Dielectrophoresis: Status of the Theory, Technology, and Applications”, Biomicrofluidics, Vol. 4 (2010) Page 022811.

S. Mukhopadhyay, J. P. Banerjee, S. S. Roy, S. K. Metya, M. Tweedie, J. A. McLaughlin, “Effects of Surface Properties on Fluid Engineering Generated by the Surface-Driven Capillary Flow of Water in Microfluidic Lab-on-a-Chip Systems for Bioengineering Applications”, Surface Review and Letters, Vol. 24, No. 3 (2017) Page 1750041.

S. Mukhopadhyay, S. S. Roy, Raechelle A. D'Sa, A. Mathur, R. J. Holmes, J. A. McLaughlin,“Nanoscale Surface Modifications to Control Capillary Flow Characteristics in PMMA Microfluidic Devices”,Nanoscale Research Letters, Vol. 6 (2011) Page 411.

S. Mukhopadhyay, J. P. Banerjee, S. S. Roy, “Effects of Channel Aspect Ratio, Surface Wettability and Liquid Viscosity on Capillary Flow through PMMA Sudden Expansion Microchannels”,Advanced Science Focus, Vol. 1, No. 2 (2013) Pages 139–144.

S. Mukhopadhyay, “Optimisation of the Experimental Methods for the Fabrication of Polymer Microstructures and Polymer Microfluidic Devices for Bioengineering Applications”, Journal of Polymer & Composites, Vol. 4, Issue 3 (2016) Pages 8–26.

S. Mukhopadhyay, “Experimental Investigations on the Durability of PMMA Microfluidic Devices Fabricated by Hot Embossing Lithography with Plasma Processing for Bioengineering Applications”, Emerging Trends in Chemical Engineering, Vol. 3, Issue 3 (2016) Pages 1–18.

S. Mukhopadhyay, “Experimental Investigations on the Effects of Channel Aspect Ratio and Surface Wettability to Control the Surface-Driven Capillary Flow of Water in Straight PMMA Microchannels”, Trends in Opto-Electro & Optical Communications, Vol. 6, Issue 3 (2016) Pages1–12.

S. Mukhopadhyay,“Report on the Separation Efficiency with Separation Time in the Microfluidic Lab-on-a-Chip Systems Fabricated by Polymers in this 21st Century of 3rd Millennium”,Journal of Experimental and Applied Mechanics,Vol. 7, Issue 3 (2016) Pages 20–37.

S. Mukhopadhyay,“Experimental Investigations on the Surface Driven Capillary Flow of Aqueous Microparticle Suspensions in the Microfluidic Laboratory-on-a-Chip Systems”, Surface Review and Letters, Vol. 24, No. 8 (2017) Page 1750107.

S. Mukhopadhyay, “Surface-Driven Capillary Flow of Aqueous Microparticle Suspensions as Working Liquids in the PMMA Microfluidic Devices”, Trends in Opto-Electro and Optical Communications, Vol. 7, Issue 1 (2017) Pages 18–21.

S. Mukhopadhyay, “Passive Capillary Flow of Aqueous Microparticle Suspensions in the Sudden Expansion PMMA Microchannels”, Trends in Opto-Electro and Optical Communications, Vol. 7, Issue 1 (2017) Pages 13–17.

S. Mukhopadhyay, “Surface-Driven Capillary Flow of Aqueous Isopropyl Alcohol in the Sudden Expansion PMMA Microchannels”, Emerging Trends in Chemical Engineering, Vol. 4, Issue 2 (2017) Pages 1–4.

S. Mukhopadhyay, “Novel Recording of the Surface-Driven Capillary Flow of Water in a PMMA Microfluidic Device by CMOS Camera”, Research & Reviews: Journal of Physics, Vol. 6, Issue 1 (2017) Pages 16–21.

S. Mukhopadhyay, “Experimental Studies on the Effects of Liquid Viscosity and Surface Wettability in PMMA Microfluidic Devices”,Recent Trends in Fluid Mechanics, Vol. 4, Issue 1 (2017) Pages 16–21.

S. Mukhopadhyay, “Experimental Investigations on the Effects of Surface Modifications to Control the Surface-Driven capillary flow of Aqueous Working Liquids in the PMMA Microfluidic Devices”, Advanced Science, Engineering and Medicine, Vol. 9, Number 11 (2017) Pages 959–970.

S. Mukhopadhyay, “Experimental Investigations on the Interactions between Liquids and Structures to Passively Control the Surface-Driven Capillary Flow in Microfluidic Lab-on-a-Chip Systems to Separate the Microparticles for Bioengineering Applications”, Surface Review and Letters, Vol. 24 (2017) Page 1750075.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Research & Reviews: A Journal of Biotechnology