Open Access Open Access  Restricted Access Subscription or Fee Access

Improvements in Wear Resistance by Hardfacing

Bangshidhar Goswami, Kumari Sipra Suman, Atul Kumar, Abhishek Kumar, Bijay Kumar Singh, Diwakar Suman, Tridib Kumar Pathak

Abstract


Wear of hardfacing appears from additive effects of abrasion, erosion, corrosion and impact in real cases where material under handling varies between dry states to damp/slurry state. Abrasion of hardfacing is a study of gouging abrasion, high stress grinding abrasion, and low stress scratching abrasion or erosion. Impacts of abrasive particulates induce additive effects to wear and material loss by embrittlement effects of carbides. Corrosion of hardfacing appears from galvanic, chemical and electrochemical effects. Slurry erosion of hardfacing is rendered as combined effects of different material loss mechanisms.


Full Text:

PDF

References


B.Goswami, K.Mahato and V.Sharma; Traditional insight of strategies in steel philosophies; J.Met.Mater Sc.; 54 (1) (2012).

Matthew Yao and Rachel Collier; Beyond valves; The official magazine of the valve manufacturers association of America. www.valvemagazine.com/magazine/sections/beyond-valves.html

M.B. Cortie. J.J. McEwan. and D.P. Enright; Materials selection in the mining industry: Old issues and new challenges; The Joumal of The South African Institute of Mining and Metallurgy; (1996) 145 – 157.

K. Siva, N. Murugan; A Study on the Influence of PTAW Process Parameters on Pitting Corrosion Resistance of Nickel Based Overlays; International Conference on Design and Manufacturing 2013 (IConDM 2013); Procedia Engineering; 64 ( 2013 ) 1147 – 1156

Shenhou Li, Zhixing Guo, Ji Xiong, Yong Lei, Yuxi Li, Jun Tang, Junbo Liu, Junliu Ye; Corrosion behavior of HVOF sprayed hard face coatings in alkaline-sulfide solution; journal ISSN : 0169-4332; DOI 10.1016/j.apsusc.2017.04.149

Nguyen Vu Tran; Corrosion behavior of hardfacing alloys used in the mining industry; A thesis submitted in partial fulfillment of the requirements for the degree of Bachelor of Engineering; School of Engineering & Information Technology Faculty of Engineering, Health, Science and the Environment Charles Darwin University Darwin May 2015

Troels Mathiesen, Harald Osvoll; Peyman Mohseni, Borge Bjorneklett ; Managing Corrosion Challenges with Drilling Risers and Subsea Equipment ; Presented at NACE Corrosion 2015, Paper C2015-6164 ; Dallas, TX, March 2015.

Djilali Allou; Corrosion of Multi-Material in Marine Environment; IC-WNDT-MI’16 2016

Rupendra Kumar, Pratibha Kumari, K.L.A. Khan; A review paper on research work done in hardfacing; International Journal of Application or Innovation in Engineering & Management (IJAIEM); 5(9) (2016).

Friedrich Franek; Ewald Badisch; Martin Kirchgaßner: Advanced Methods for Characterisation of Abrasion/Erosion Resistance of Wear Protection Materials; FME Transactions ; 37 (2009) 61-70.

Serdar Atamert; Stability, wear resistance and microstructure of iron, cobalt and nickel-based hardfacing alloys; A dissertation submitted for the degree of Doctor of Philosophy at the University of Cambridge, November (1988).

Robert E. Melchers; Principles of Marine Corrosion; Springer Handbook of Ocean Engineering; 111-126

Gulovleen Singh, Roshan Lal Virdi, Khushdeep Goyal; Experimental Investigation of Slurry Erosion Behaviour of Hard Faced AISI 316L Stainless Steel; Universal Journal of Mechanical Engineering; 3 (2) ( 2015)52-56.




DOI: https://doi.org/10.3759/joost.v6i3.751

Refbacks

  • There are currently no refbacks.